
EU Adds MCCPs To POPs Controls With December Application
The EU has published MCCP controls applying from 16 December 2026. The listing sets a 0.1% unintentional trace-contaminant limit, specific exemptions and safety-data-sheet requirements.
Foresight
3 min readAI-drafted, expert reviewed

The EU has published Delegated Regulation (EU) 2026/2035, adding medium-chain chlorinated paraffins, or MCCPs, to its persistent organic pollutants controls. The regulation appeared in the Official Journal on 18 November 2026 and applies from 16 December 2026.
It concerns manufacturers, suppliers and industrial users of covered chlorinated paraffins, including specified uses in metalworking fluids, cables, sealants and coatings. Adopted on 11 September, the regulation enters into force on 8 December 2026, before its application date.
Scope And Concentration Limits
The listing covers linear C14 and C15 chloroalkanes with at least five chlorine atoms, and C16 and C17 chloroalkanes with at least six. Annex I listing brings these substances within the POPs Regulation’s prohibition on manufacture, placing on the market and use, subject to exemptions.
The general unintentional trace-contaminant limit is 1,000 mg/kg, or 0.1% by weight, for the sum of the specified chloroalkanes in substances, mixtures or articles. This is a trace-contamination provision, not a general permission for intentional use below that level.
A separate 20,000 mg/kg, or 2%, limit applies until 16 December 2028 to recovered cable-recycling material, or articles made from it, used in road furniture or fence-support blocks. It does not cover every recycled material.
Industrial Exemptions Have Different End Dates
The annex permits specified uses, including:
- Extreme-pressure additives in heavy-duty professional or industrial metalworking fluids with collection systems, until 31 December 2036.
- Flexible PVC in construction wires and cables until 16 December 2028, and in specified medical-device wires and cables until 16 December 2031.
- Polysulfide sealants and one-component polyurethane foam for doors and windows until 16 December 2028. Qualifying polyurethane foam containing recovered material has an exemption until 16 December 2031, provided its can identifies that recovered content.
Other exemptions cover defined spare parts, coatings, aerospace and defence uses. Their conditions and expiry dates differ. During exempt manufacture and professional or industrial use, environmental releases must be avoided or reduced as far as possible, and worker exposure minimised.
Safety Data Sheets And Existing Articles
Manufacturers, suppliers and importers placing chlorinated-paraffin substances or mixtures on the market must state the sum of the covered chloroalkanes in the safety data sheet. Above 0.1% by weight, they must also specify appropriate risk-management measures and operating conditions. Concentrations must be determined from representative batches using validated analytical methods.
The base regulation provides a six-month exemption for substances in articles produced before or on the date the regulation becomes applicable to them, and protects continued use of articles already in use by that date. The new entry also expressly preserves continued use of articles already in use by the expiry of the relevant exemptions in paragraph 3(b)–(h).
Topics
Questions about this change
When do the EU’s MCCP controls in Regulation (EU) 2026/2035 apply?
They apply from 16 December 2026. The regulation was published on 18 November and enters into force on 8 December. Specific industrial exemptions and provisions for existing articles mean the listing is not an immediate ban on every MCCP-containing product.
What concentration limits does the EU MCCP listing set for trace contamination?
The general unintentional trace-contaminant limit is 1,000 mg/kg, or 0.1% by weight, for the sum of the specified C14–C17 chloroalkanes. Until 16 December 2028, a 20,000 mg/kg limit applies specifically to recovered cable-recycling material and articles made from it used in road furniture or fence-support blocks.
Find out what this means for your products
Foresight follows changes like this one and shows where they reach your substances, products and markets.
Join 3,500+ professionals staying ahead
Foresight Weekly brings the week's regulatory changes across chemicals, product safety, sustainability, ESG and EHS into one email.
Read by professionals at

