Foresight LabsA jacket, two journeys

United States

EPA Approves Pennsylvania VOC Controls For Ozone Standards

EPA has approved Pennsylvania’s VOC control-plan revisions for the 2008 and 2015 ozone standards. The federal approval takes effect on 21 December 2026.

Foresight

2 min readAI-drafted, expert reviewed

Industrial pipework and valve assemblies at a manufacturing facility

The US Environmental Protection Agency has approved four revisions to Pennsylvania’s air-quality plan covering volatile organic compounds, or VOCs. The final rule published on 19 November 2026 takes effect on 21 December 2026.

The approval addresses reasonably available control technology requirements under the 2008 and 2015 ozone standards. It covers state regulations and specified facility permits, including controls affecting chemical and polymer manufacturing.

Industries And Permits Covered

The rule addresses controls for shipbuilding and ship-repair surface coatings, large petroleum dry cleaners, and leaks from synthetic organic chemical polymer and resin equipment. It also covers air oxidation, reactor and distillation processes in synthetic organic chemical manufacturing.

For high-density polyethylene, polypropylene and polystyrene resin manufacturing, EPA is incorporating specified portions of permits for Multiplastics Extrusions in Hazelton, Rohm & Haas in Bristol, and Shell Chemical Appalachia.

EPA also accepts Pennsylvania’s certification that the existing BASF Monaca permit remains sufficient for the 2008 and 2015 ozone requirements. That permit had previously been approved for the 1997 ozone standard.

Earlier Disapproval And Sanctions

In August 2024, EPA partially disapproved earlier Pennsylvania submissions because the record did not sufficiently support the required VOC controls. In July 2026, it proposed approval of the revised submissions and issued an interim determination staying offset sanctions and deferring highway sanctions.

The final approval finds that Pennsylvania has addressed those deficiencies. It permanently stops the offset sanctions and prevents the highway sanctions arising from that partial disapproval.

Federal Approval And Scope

EPA says the action approves state law as meeting federal requirements and imposes no additional requirements beyond state law. The approval does not extend to Indian reservations or other areas where EPA or a tribe has demonstrated tribal jurisdiction.

Questions about this change

When does EPA’s Pennsylvania VOC plan approval take effect?

The final rule takes effect on 21 December 2026. Published on 19 November, it approves Pennsylvania plan revisions addressing VOC control requirements for the 2008 and 2015 ozone standards.

Which industries are covered by Pennsylvania’s approved VOC plan revisions?

The revisions cover specified controls for shipbuilding coatings, petroleum dry cleaning and synthetic organic chemical manufacturing. They also address permits for high-density polyethylene, polypropylene and polystyrene resin manufacturing. Applicability follows the approved regulations and permit provisions.

Find out what this means for your products

Foresight follows changes like this one and shows where they reach your substances, products and markets.

Join 3,500+ professionals staying ahead

Foresight Weekly brings the week's regulatory changes across chemicals, product safety, sustainability, ESG and EHS into one email.

Free. Unsubscribe at any time.

Read by professionals at

  • Boeing
  • AstraZeneca
  • Siemens
  • PepsiCo
  • SpaceX